Kingwin KC-6GPU-SS steel open-air frame

Cat. no. case-frame-kingwin-kc-6gpu-ss

Curator note

A compact cold-rolled-steel open frame Kingwin rates for six GPUs and ATX boards, so it takes the ATX boards on this list (ProArt X870E-Creator, ROMED8-2T, H12SSL-NT, H13SSL-N) but not the E-ATX, CEB or EEB ones. Beyond two cards the GPUs need PCIe risers, and Kingwin states no maximum card length, only that cards under 25 cm need the included holding bar, so check that long cards such as the 313 mm RTX 3090 FE fit the 285 mm-wide frame. For a 1–4 GPU headless build it is the smallest frame here and relatively inexpensive, with four fan slots, no dust filtering and no noise damping.

No paid placement

Specifications

Type	open-frame	Source
GPUs supported	6	Source
Max board	ATX	Source
Height	225 mm	Source
Width	285 mm	Source
Depth	500 mm	Source

Used in build tiers

Not part of a build tier yet.